If you don’t have the right tools on hand, the best thing to do is to call for a locksmith. They’ll be able to extract your broken key and make a duplicate key for you on-the-spot.

Take your screwdriver and insert it into the ignition lock cylinder. Turn it as far round in a clockwise direction that you can. Then pull the paperclip to the right as much as you can. You should then be able to slide the switch out easily.

Common reasons the ignition key won’t turn include attempting to use a key for a different vehicle, or a locked steering wheel. You can unlock the steering wheel by turning the steering wheel from side to side while simultaneously turning the ignition key on.

Removing a broken regular key from an ignition will typically run you between $100 to $150, depending on the severity of the repair. Some special cases will be slightly more, some slightly less. Next up are transponder keys. These are more complex keys that interact with your vehicle’s security system.

Use super glue, melted wax, or putty on your tool’s tip, latch onto the key piece with your pliers and pull the key out. If using super glue, wait for the glue to set first before pulling the key out.

Turn the wire toward the teeth of the key. Slowly try to catch a tooth in the bent wire and pull the wire out of the lock with the key. Step 5: Pull the broken key out with pliers. Once a small part of the broken key comes out of the cylinder, use your needle-nose pliers to pull it out completely.

There is no way to fix a key that has broken in half so that it functions perfectly and is also not in danger of breaking again in that same spot after a few uses. What you want to do instead is take the broken key to a locksmith or your hardware store.

When a car key breaks, unless you have an additional copy, you will need to get a new one made. Most key duplicators at hardware stores like Home Depot or Lowe’s cannot duplicate broken keys. Usually the best practice is to cut a new car key by code instead of tracing a copy from the old one.

Can You Copy a Broken Key? While broken keys can be copied, you need to take into consideration how badly damaged the key actually is, as the key is an exact duplicate of what is available to be copied. A professional locksmith would measure the cuts on the key and cut the key to code.

A skilled locksmith will be able to remove snapped keys from all types of locks such as: Remove snapped key from Door locks such as Yale locks and Euro cylinders.

One way to temporarily fix a broken car key is to super glue it together. You have to be really careful when doing so though. You don’t want the key to break off in the ignition or door.

When a key gets stuck in a lock it is usually because the lock needs to be lubricated. Just think of where your key might have been – kitchens, pockets, gym bags – all of these places can result in dust and dirt on your key that then gets transferred inside the lock, causing you a problem.

Can you unlock a door if the key is on the other side? Yes, you can, providing that your door has been furnished with a frictioned cylinder lock or one that has an emergency function. These two types are designed to be unlocked with a key even if there’s another key inside on the other side of the door.