A well is an excavation or a structure which is created by digging or drilling a hole into the ground to reach water in underground aquifers. The water can then be drawn up by either a pump or bucket, raised mechanically or by hand.

The most important materials used include: Casingis used to maintain an open access in the earth while not allowing any entrance or leakage into the well from the surrounding formations. The most popular materials used for casing are black steel, galvanized steel, PVC pipe and concrete pipe.

Excavators: Used for digging up old wells or moving large components. Backhoe: Also used for digging up old wells and moving dirt. Mobile Crane: This machine allows us to pull up pumps in restricted areas as small as 3 feet.

Can Your Well Run Out of Water? If your well has been correctly drilled, it can last your family a lifetime, but it is possible for a well to run dry. This often happens with wells that are too shallow. If a well is not drilled deep enough, it may only be a water table well.

Deeply drilled wells can recharge themselves and will provide clean plentiful water, even during extended periods of dry weather. Water wells use pumps that are used to drive water from the ground to your home.

But just because most wells will fill back up when they’re given a break from a household’s excessive water usage, that doesn’t mean that thirsty homeowners are completely out of the woods. Running a well dry can severely damage your water pump, which can cost thousands of dollars to replace.

Warning Signs your Water Well may be Running Dry

• SIGNS YOUR WELL HAS RUN DRY.
• A Change In Taste.
• Murky or Muddy Water.
• Pump Runs Longer.
• Faucets Begin Sputtering.
• Neighbors Also Report Water Problems.
• HOW TO FIX A DRY WELL.
• HELPFUL TIPS.

Yes, as a private well owner, you are responsible for testing your well to ensure the water is safe to drink. EPA is responsible for making sure that the public water supply within the United States is safe. However, EPA does not monitor or treat private well drinking water.

Drilling a Well: An Overview When the soil conditions are exactly right, you can use a DIY well-drilling kit. Along with the PVC piping, you will need a permanent well pump. If you go deeper than 50 feet or so, you will need a submersible, in-ground pump to move the water to the surface.

If you want to use a bucket or manual means of getting the water, the shallower dug well is your better bet. If you, however, choose to use water screw to draw water, then the driven well would be your ideal type.