How to format a USB flash drive to NTFS on Windows

1. Plug the USB drive into a PC that’s running Windows.
2. Open File Explorer.
3. Right-click the name of your USB drive in the left pane.
4. From the pop-up menu, select Format.
5. In the File system dropdown menu, select NTFS.
6. Select Start to begin formatting.

How to Format a Hard Drive Using the Command Prompt

1. STEP 1: Open Command Prompt As Administrator. Opening the command prompt.
2. STEP 2: Use Diskpart.
3. STEP 3: Type List Disk.
4. STEP 4: Select the Drive to Format.
5. STEP 5: Clean the Disk.
6. STEP 6: Create Partition Primary.
7. STEP 7: Format the Drive.
8. STEP 8: Assign a Drive Letter.

Open an MS-DOS command prompt by clicking “Start,” “All Programs,” “Accessories” and then “Command Prompt.” Type “format drive_letter: /fs:ntfs” into the command prompt, without quotes and substituting in the drive letter of the drive you want to format for “drive_letter.”

If you input format command without “fs=ntfs quick or fs=fat32 quick” in DiskPart, it will execute a full format on your selected hard drive partition. This command will erase all saved data sector by sector without data recovery chance. In other words, you’ll permanently lose all saved data on the disk..

Method 1. Format USB drive to NTFS using Windows File Explorer

1. Open Windows 10 File Explorer (Windows + E), locate and right-click on the USB drive, select “Format”.
2. Set the NTFS as the target file system, tick “Quick Format” and click “Start” to start the formatting.
3. When the process completes, click “OK” to confirm.

A quick format allows you to overwrite any files on the drive, but it does not fully erase them; with the right software, the old files could be recovered. A full format is generally preferred over a quick format; the latter is mostly used for its speed.

1 Press the “Windows key + X” on your keyboard to open the Power User menu and select “Command Prompt (Admin)” to launch Command Prompt. 2 Type “Diskpart” in the Command Prompt and press “Enter”. 3 Then execute the following commands in sequence:

But you can change your luck by merely reformatting your FAT32 Drive to NTFS with the assistance of Windows’ built-in utilities such as Disk Management or using the “Diskpart” command in MS Command Prompt. Part 3: How do I Format Hard Disk to NTFS?

format fs=ntfs quick: format partition to NTFS file system. When the formatting process is completed, you can run the “exit” command to close DiskPart.

Take format USB exFAT to NTFS for example. Step 1. Press Windows key and R key simultaneously to open Run. Type cmd and click OK. Run as administrator. Step 2. Type: format F: /FS: NTFS (where F: is the drive letter of USB) and hit Enter. Specify partition label if you want to.