Troubleshooter – Sounds and volume Does your device not produce any sound? You might have turned the volume down completely. You can check and adjust this via the menu. Choose the menu symbol > Settings > Sound > Ring volume.

How to Fix It When the Speaker Is Not Working on Your Android Device

1. Turn on the speaker.
2. Turn up the in-call volume.
3. Adjust the app sound settings.
4. Check the media volume.
5. Make sure Do Not Disturb isn’t enabled.
6. Make sure your headphones aren’t plugged in.
7. Remove your phone from its case.
8. Reboot your device.

If the loud speaker is defective or blown, you may experience symptoms such as no sound at all except through the earpiece, crackling audio, or intermittent audio issues. If any of that sounds like something you’re experiencing, your loud speaker will most likely have to be replaced.

Causes of Problems With Android Phone Volume Several issues can cause problems with Android phone speakers: Your phone is tethered via Bluetooth to another device that plays sound. An app is running in the background that controls the overall volume. The speakers or headphones have hardware problems.

If you are on a call and suddenly, the person you are talking to can’t hear you, then the problem may be caused due to network issue. The microphone on your Android mobile device has openings and as time goes on, dirt particles can accumulate in the microphone thereby causing an obstruction.

The most common aural indication of a blown speaker is an unpleasant buzzing or scratching sound, by itself or roughly at the pitch of the note the speaker is attempting to reproduce. Or there could be no sound at all.

Tap the Phone icon.

1. Type in *#7353# into the dialer as though you are dialing a phone number.
2. You will be presented with a list of options.
3. Don’t get startled and drop your phone on accident!
4. Once you tap on Speaker, music should start to play.

In addition, a software or app glitch in the device may also result in muffled sound output – or worse, the phone speaker stop working at all. This is because the Android fails to process that event, and in spite of taking the headphone out, your speaker remains disabled.

1. Ensure whether a valid number has been dialed and the “pick up call” key is pressed 2. It should be ensured that the Alcatel phone is connected to the network which is not overloaded or unavailable 3. The subscription status of the service provider should be cross verified 1.

The list below explains several ways of force restarting a frozen Alcatel flip phone. 1. Press the key a bit longer It typically takes 3 seconds to press and hold the PWR/END for the phone to restart. However, this time gives it more time. You can try holding up until 10 seconds and see what happens.

Open the back cover and take off the battery. The phone will turn off afterward. Next re-insert the battery again and turn your phone on. Charging problems also occasionally happen on Alcatel flip phones. You may find it doesn’t detect the charger, or the battery seems like it doesn’t charge. When that happens, do the following as troubleshoots.

1) Go to “Settings”. 3) Touch “Reset”. 4) Touch “Factory data reset” to start. 5) Touch “RESET PHONE” in the open window. 6) Touch “ERASE EVERTHING”. Warning: this action will erase all your personal information and downloaded apps. Factory reset with your phone in Shutdown state. 1) Power off the phone.