1. Increase HP gain- 7.41 HP at 4600 RPM.
2. outflows flow rate- Easy to install.
3. Comes with Largest possible K&N Filter charger cotton-gauze filter (washable & Reusable)
4. Heat Shield plus gives better throttle response & Engine sound.

If you want to increase the horsepower, you’ve essentially got to find ways to move more air in a greater volume through your engine.

1. Installing a High-Performance Cold Air Intake to increase horsepower.
2. Installing a High-Flow air filter and intake.
3. High Performance Exhaust System.
4. Supercharger.
5. Turbocharger.
6. Nitrous.

The only thing you can do to improve the HP noticeably is to supercharge the engine. There are no bolt-on, programmable, swappable or otherwise simple mods that will magically unleash the secret power of your 2.7 I4.

When equipped with the V6, the 2021 Toyota Tacoma is capable of producing 278 horsepower and 265 pound-feet of torque. With the available 3.5-liter V6 engine, the 2021 Toyota Tacoma is capable of towing up to 6,800 punds when appropriately configured.

If you get the TRD intake and sport exhaust, I would expect 7-10 real-world horsepower increase. If the TRD intake and tip, I would expect 6-ish. Either way, the increase to mid-range will feel dramatic to the driver.

It makes such a big difference, in fact, that the simple process of redirecting the filter to draw cooler air is good for a horsepower gain of about 5 to 20 ponies in most cars. It might even improve your fuel efficiency, and it’ll probably make your engine sound better, too.

Removing the cat will have almost zero impact on engine HP. The exhaust will be slightly less restrictive, but that will cause unnoticeable gains. A more effective way to boost HP is to retune the engine, by advancing the timing.

Installed the trd cai on my 2017 trd pro. It did make a difference. I recommend it if you want to put out the money. An improvement from take off and low speed acceleration.

If you’re looking to start messing around in your Tacoma’s engine bay, a cold air intake is a great way to familiarize yourself with engine modding. The horsepower and torque gains may vary, but one things is for sure: installing a cold air intake will improve the overall performance and drivability of your Tacoma.

14 hp

TRD Cold Air Intake System Optimized airflow to engine intake can increase fuel efficiency. Features reusable high-flow, low restriction air filter that can be cleaned and reused for the life of the vehicle. Incorporates a vacuum indicator that monitors filter efficiency and indicates when filter service is required.

Toyota does not advertise the actual increase in both HP & torque the cold air intake would add.

A cold air intake is like amazing medicine that allows your engine to finally breath. Cold air intakes move the air filter outside of the engine compartment so that cooler air can be sucked into the engine for combustion. Not only does a cold air intake reduce the air temperature, but it also increases airflow.

It’ll help your engine draw in more cold air, create a better throttle response and deliver more explosive horsepower. Once it’s installed, this cold air intake setup can increase your horsepower by 8 to 10 percent and your torque by 6 to 10 percent.

Quick answer – Yes. The sound of your car will be louder and more aggressive with a cold air intake. Instead of loudness though, a cold air intake changes the sound of your car engine.

Because the cold air intake affects the engine, a dirty, clogged or failing cold air intake will decrease the performance of the vehicle as well as its fuel economy. When the filter gets dirty enough, the engine’s horsepower will be reduced.

For a quick answer – no, you don’t need to tune your car after installing a cold air intake. Tuning your car is expensive and for doing it only to optimize a cold air intake is not worth the money. A cold air intake is a cheap and easy upgrade that does not require tuning.

It has been found that cold air intakes with a 90-degree bend can offset your car’s idle, especially when combined with other aftermarket parts. This causes problems when air is being sucked into the engine, because it causes the air to roll.

6 Answers. It will have no affect on the longevity of the engine or components as long as you get one with a decent filter on it. You’ll have to check reviews on different elements to ensure you are getting one which is good.

So if you can get cooler air into your engine, your car will be able to mix more fuel with that air, making more power. Combine that with the more air through the larger and less restrictive filter and intake tube and you can see up to a 10-15 horsepower increase.

Cold air intakes, for example, are illegal in Arizona, California, New York, Pennsylvania, and several other states if they don’t carry a CARB Executive Order (EO) number.

So does a cold air intake system really work? When you introduce a high volume of cold air to the combustion process, the engine is able to burn the fuel more completely, and that results in additional horsepower. So yes, a cold air intake system does work.

Compared to hot air, cold air allows more fuel to burn more efficiently, due to the increased rate of oxygen combustion. Because of this, installing a cold air intake kit may result in increased horsepower.

If you are tight on budget and like the sound of wind rushing through your car when you accelerate, then install cold air intake first. Otherwise, if you have more budget and are more concerned with horsepower and aggressive sound, then install an aftermarket exhaust first.

The cold air intake does typically get denser air than the stock intake. However, since it is longer and more requires more complex routing, it is often more expensive. This increased complexity also leads to a more difficult and time-consuming installation.

This is all we needed to build our own free-flowing intake tubing: an air filter, different-length, different-angled tubes, and some silicone sleeves. By rotating the angled tubing or cutting different lengths, any number of configurations can be created for any vehicle.

Ram air intakes are basically the only ones worth upgrading to, but they’re not really worth it for most people. New performance tires, suspension mods, etc. Will go much further for driving feel and capability. Nobody likes to hear it but there is no cheap bolt on that increases power enough for it to be worth it.

Both cold air intakes and short ram intakes aim to bring more air into the engine. This results in better combustion and more power and torque. Some manufacturers claim that their intakes can add as much as 20 horsepower. Both cold air and short ram intakes provide a smoother path for air to follow to the engine.