Marble is currently being obtained from open cast quarries such as Crema Marfil Coto. But also from underground quarries. Extraction methods and the resulting marble block sizes will depend on the quarry in question. Marble quarrying is usually done in vertical cuts.

Marble is a rock resulting from metamorphism of sedimentary carbonate rocks, most commonly limestone or dolomite rock. Metamorphism causes variable recrystallization of the original carbonate mineral grains. The resulting marble rock is typically composed of an interlocking mosaic of carbonate crystals.

Most of the time, a solution of dish soap and warm water is all that’s needed to keep marble looking new. You can also clean marble floors with a solution of dish soap and warm water—and you don’t need to get down on your hands and knees.

Baking soda is a light abrasive and a natural disinfectant. However, you need to take care to use it gently on marble surfaces. Light abrasives can still damage soft surfaces. Be sure to wipe away all traces of baking soda, so it isn’t left in contact with your marble surfaces.

One of the easiest is to mix a small amount of mild dishwashing soap such as Dawn dishwashing detergent with water and using that to clean the countertops. You must make sure it is a mild soap, as some dishwashing detergents contain harsh chemicals that are not compatible with marble countertops.

Avoid placing toiletry products such at hair products, perfumes, toothpaste, nail products, creams, lotions, and colognes on marble surfaces because they can etch the surface resulting in a ring shape. We recommend using a decorative tray to store these items if you want to leave them displayed.

Another traditional method to restore the gleam of marble countertops is to polish them with baking soda. Mix three tablespoons of soda with one quart of water and apply it on the surface, then let air dry for several hours.

Options for Consumer-Rated Best Marble Cleaner

As marble wears, the highly polished surface begins to become scratched and worn. The wearing of this polish causes the surface to become rough and become a magnet for dirt. If improper cleaners are used, this dirt begins to accumulate in the pores of the stone can will turn yellow.

Marble is porous and can be damaged by spilling an acidic substance on it. Don’t use vinegar, Windex or bleach on marble. A single use of these acidic substances will eat into a marble countertop’s surface and dull the stone. Don’t use abrasive cleaner or pads, either, because marble can be scratched.

Bar Keepers Friend Granite & Stone Cleaner & Polish is specially formulated for use on smooth, polished stone, including granite, marble, and quartz. Its pH-balanced formula won’t scratch or mar stone finishes, and it’s gentle enough to use every day.

Magic Erasers are abrasive, so avoid using them on delicate countertops such as marble and granite. Not only can you damage the sealant but the eraser may make the countertop appear dull.

What Happens If Bar Keepers Friend Left On Too Long? It’s recommended that the product be left on for a maximum of one minute. This is especially important for metal surfaces – leaving it on too long could cause discoloration.

Bar Keepers Friend can damage natural stone materials, such as granite or marble, and precious metals, such as pewter, silver and gold. It’s not ideal for more delicate surfaces (lacquered, painted or mirrored) or wood either.

Granite polishing powder: Also called stone polishing compound, powder offers a quick and easy way to put a fresh gleam on granite while removing minor scratches and stains. If using it dry, choose a buff polishing pad to work the polish over the surface of the granite in a steady, circular pattern.

Products that are not specifically made for cleaning stone, such as oven cleaners, lime scale removers, bleach, and acetone, can damage quartz by discoloring or bleaching out the resin binding the quartz materials together. …

Clorox wipes are not suitable for Quartz Countertops because of the presence of citric acid in them. Citric acid would make your Quartz slab susceptible to discoloration.

The Magic Eraser is abrasive and that can often work for removing surface stains from quartz, but it can sometimes dull the surface as well. It doesn’t always happen, but it is a risk. The abrasives dull the resin part of the countertop.

Quartz countertops are non-porous, making them resistant to bacteria and staining. For this reason, harsh cleaners like bleach aren’t required. In reality, bleach can damage the surface of your quartz or cause permanent discoloration to the slab.

Yes, you can use a Magic Eraser to clean quartz. They won’t scratch the surface and can even remove some imperfections you thought you had to live with.

Cleaning quartz countertops doesn’t need to take a lot of work. If you need something a little hardier than the initial soap and water, you can make your own quartz countertop cleaner using rubbing alcohol and dish detergent. Mix three parts dish detergent for one part rubbing alcohol. Mix with warm water.