Length x width x average depth x 7.5 = volume (in gallons) Measure the length, width, and average depth of the pool, rounding each measurement off to the nearest foot or percentage of one foot.

The typical size is 15 feet by 30 feet. The standard depth is approximately 5.5 feet, with a standard shallow end coming in at 3 feet and deep end at 8 feet. A pool with these dimensions would yield an average amount of 13,500 gallons of water. Next, we investigated the number of pools that exist in America.

Approximate inside (water) dimensions – 24′ Diameter. Approximate outside dimensions (space required) – 25′ Diameter. Approximate Water Capacity – 13,500 Gallons.

The average cost of a typical 24′ round pool (containing 14,700 gallons) with your water hose is going to cost you about $80-$160. These costs are depending where in the country you live and your local water supply markets. You can get exact numbers by calling your local township and they will let you know your rates.

It is easy to figure out how many people will fit in a pool. If you have an 24 foot round pool you will be able to have roughly 30 swimmers.

While an ideal size for swimming laps is 6 feet in width by 60-75 feet in length, you can still fit a pool that accommodates exercise in as little as 30 feet. And, of course, if splashing and drinking is your main objective, any size will do.

Increase your cardio swimming Swimming cardio is one of the most effective ways to lose weight including your belly fat. This requires you to keep swimming for 15-20 minutes at the time while maintaining your heart rate levels in the particular zone that we call – fat burning zone.

While the sizes and dimensions of pools vary, anything that’s about 10 feet by 10 feet or smaller is typically considered a small pool. In terms of depth, three feet is standard for soaking and floating, and four to five feet and above is the best depth for lap pools.

45 feet

For swimmers and fitness enthusiasts, a lap pool can be an attractive option. It can take the stress out of going for a swim, allowing homeowners to skip the gym commute, locker room, and crowded swim lanes. But installing a lap pool can also require permits, lengthy construction timeline, and additional landscaping.

Lap Pool Dimensions

$50,000

A full-length 25-yard or 25-meter pool can easily exceed $100,000, once you factor in everything. The cost to build a backyard pool with a lap lane varies with location, materials, topography, and the type of features you want.

premade fiberglass shell

Not only does a pool increase your social worth, but it can also increase the value of your home. But probably not as much as you think. According to HouseLogic, there’s no real guarantee that you’ll make your money back. In fact, adding a swimming pool may only increase your home’s value by 7%.

Inground Pool Sizes & Prices

A 12×24 foot pool has a surface area that covers 288 feet, so it should be big enough for your needs based on this rough calculation.

Why is having a new pool installed so expensive anyway? The answer, quite simply, is that it is an appreciably large construction project with many different stages, expensive components, utility provisions such as gas, electrical and plumbing being needed.

Here are five ways to save money – whether it’s a few hundred dollars or thousands.

1. Choose Vinyl. Vinyl pools are markedly less expensive than either concrete or fiberglass – in terms of initial price tag, anyway.
2. Go with a Smaller Pool.
3. Use a Pool Kit.
4. Install in the Fall.
5. Cut Out the Extras.

Concrete

Overall, vinyl liner pools are the cheapest inground swimming pools that money can buy. It’s rare to find a pool builder who can build a concrete or fiberglass pool at a vinyl liner pool price.