Set the Clock Press the “Time” button on your Uconnect unit and hold it until the hours digits flash. Turn the tuning knob clockwise or counterclockwise to increase or decrease the hour value. Once the hour is correct, press and release the tuning knob and the minutes digits will flash.

How to change the clock on the 5.0 (RA2)

1. On the right-hand side of the radio, push the MORE button.
2. Press the SETTINGS option on the touchscreen.
3. Select CLOCK and DATE.
4. Press SET TIME.
5. Touch UP or DOWN arrows to set the hours and minutes.
6. Select 12hr or 24hr format.
7. On the touchscreen, select DONE to exit.

Clock Setting Procedure

1. Press and hold the TIME button until the hours blink.
2. Adjust the hours by turning the right side TUNE/ SCROLL control knob.
3. After adjusting the hours, press the right side TUNE/ SCROLL control knob to set the minutes.
4. Adjust the minutes using the right side TUNE/ SCROLL control knob.

How to Set the Clock in a 2002 Jeep

1. Sit in the driver’s seat of your Jeep Wrangler.
2. There are many controls on the front of the radio.
3. Insert the tip of a ballpoint pen into the hole labeled with an “H” for the hour setting.
4. Insert the tip of your ballpoint pen into the hole labeled with an “M” for the minutes setting.

Switch on/Press in the start button without starting the engine. Press the menu button to the right of the console screen. On the screen, touch System setup, then Time setup. Touch the up and down buttons to reach your desired hour and minute.

Press and hold the TIME button until the hours blink. SCROLL control knob. will begin to blink. knob to save the time change.