To turn the motion sensing feature On or Off, push the motion sensing switch or button on the door control. If you have a motion sensor and your lights are staying on after you leave the garage: Locate the auto or OFF switch or button on the door control and turn the motion detector off.

The opener’s light may be staying on because the light feature has been activated. The light feature was designed to turn on automatically so you never have to enter a dark garage. This feature is triggered when you interrupt the signal between the photo eye sensors when entering or exiting the open garage door.

If your LiftMaster door opener light is blinking, stays on or won’t turn off, you can simply access the Smart Control Panel to change the setting. Just follow these easy steps: Step 1: Press Menu on the Smart Control Panel. Step 2: Use the down arrow to highlight ‘Light Settings’

By simply moving one of the photo eye sensors, a garage door opener will not operate properly. Disconnecting the garage door opener from the garage door will bypass the sensors. According to the home improvement website Hunker, “Pull the emergency release cord to disconnect the garage door from the opener.

More specifically, if your garage door light won’t shut off, it is most likely due to one of these reasons: Something is triggering your garage door motion sensors, which are responsible for turning the light on and off automatically. You left the panel light switch on. Your garage door’s light feature is engaged.

The standard delay is 4-1/2 minutes but this can be adjusted using a Multi-Function door control, if one is installed. If your light consistently stays on, the reason may be as simple as the light button on your Multi-Function door control being accidentally pressed.

Activate the Light Feature

1. Close the garage door.
2. Start with the garage door opener lights “ON”.
3. Press and hold the light button for 10 seconds. (Upon pressing the light button, the lights will immediately turn off and come on 10 seconds later.)

Benefits of Unplugging: There are some benefits to unplugging your opener if you are experiencing problems opening your garage doors. If this is not due to a physical problem with an actual door component, the system may benefit from being reset to original factory settings.

around 10 to 15 years

The most likely culprit is an obstruction. Garage doors have sensors that keep them from closing on top of an object, so you’ll need to check to make sure there isn’t something blocking the way.