Locate the yellow plastic electrical connector and unplug the connector by hand. Find the green plastic electrical connector next to the yellow connector and unplug it by hand in order to disable the Jeep Grand Cherokee airbag.

How do I turn off the airbag light in my Jeep?

1. Put the key into the ignition and turn the switch to the “on” position.
2. Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off.
3. Repeat Steps 1 and 2 two more times.

The airbag light indicates that something is wrong with the seatbelts or airbags. This means that it’s probably not safe to drive with the airbag light on. If it stays illuminated in your vehicle, we recommend having it towed to the dealership rather than driving it yourself.

If the airbag warning light illuminates, it could indicate that the sensor has failed and that the airbags might not work properly in a crash. Even if the warning light isn’t illuminated, owners should verify whether their vehicle is affected by this recall.

If the airbag light is on, it means that the airbag will not be able to deploy in the event of an accident. This is a dangerous proposition, and it means that you should avoid driving if at all possible in that vehicle.

Often, all it takes to get rid of that pesky warning light is to reset your airbag sensor. Remove the terminal clamp and leave it disconnected for 5-10 seconds to allow the airbag sensor to reset. Then reconnect the battery terminal and turn the vehicle on. With a bit of luck, the light will stay off.

How to Reset an Airbag Light

1. Put the key into the ignition and turn the switch to the “on” position.
2. Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
3. Repeat Steps 1 and 2 two more times.

Blown fuses can definitely cause the airbag light to come on. When the airbag system is malfunctioning, a mechanic or auto parts store should be able to read the code that the system is putting out which will give them a clue as to what particular problem the airbag is having.

The bottom line is that, when your airbag light comes on, it’s vital that you don’t drive any further and have your car checked by a mechanic as soon as possible. Until the problem is diagnosed and fixed, your airbags will not deploy.

How to Turn Off the Airbag Light

1. Turn on the ignition switch with your car key.
2. Wait for the airbag warning light to turn off.
3. Turn the ignition switch of your car back off for a little longer than three seconds.
4. Repeat steps 1 through 3 twice to make three times total.

A bad battery will affect he voltage regulator and alternator. The alternator is now working harder to charge something that can’t be charged. A bad airbag sensor will cause your airbag light to turn on. …

If all parts of this system are not working properly, it can cause the airbag light to come on. If you’ve been in an accident, the airbag light is going to stay on until the system has been restored. It will not work until repaired. Here are some common reasons that your Grand Cherokee’s airbag light could come on. 1. Seat Belts

Every time you start your Jeep Grand Cherokee, the computer system runs a self diagnostic check on all major systems. If any of these checks fail, you will see a diagnostic warning light on the dash for the corresponding system. When the airbag system fails this check, you’ll see the airbag light.

It works in tandem with the system to protect you in the event of an accident. If all parts of this system are not working properly, it can cause the airbag light to come on. If you’ve been in an accident, the airbag light is going to stay on until the system has been restored.