Most of the time wells are at least 10 feet from the property line. That means your well and your neighbour’s well are at least 20 feet apart.

In general, when it comes to water quality and well depth, there’s one golden rule: the deeper the well, the better the water quality. As you go deeper down, there’s a higher chance that the water you encounter will be rich in minerals.

If the ground is soft and the water table is shallow,then dug wells can work. They cannot be dug much deeper than the water table — just as you cannot dig a hole very deep when you are at the beach… it keeps filling up with water!

Well Deepening: Reentering an existing well and drilling to a deeper reservoir. Well deepening is re-drilling into an already existing well in order to find a deeper more productive reservoir. Sometimes a previously unproductive well can be deepened in order to reach a location with higher flow and temperature.

To drill a well 400 feet deep, the cost may run $6,000 to $12,000. These figures don’t include the well pump, the piping for water delivery, pressure switch, the storage tank or any plumbing from the well to the house site.

Well Drilling and Digging Cost Per Foot

The costs of permanent power The power company will give some service lines for free—for instance, from the road to a site 100 feet away. But when you move beyond with many more poles and many more feet of wire required, then the cost can be $25 to $50 per foot.

Use the well point method.

1. Start a pilot hole. Using a post hole digger or shovel, dig a hole two feet deep.
2. Install your well point. Well points are generally made of steel or any other hard metal so that they can withstand being driven deep into the ground.
3. Begin driving the well point.
4. Add each extension of pipe.

Yes, as a private well owner, you are responsible for testing your well to ensure the water is safe to drink. EPA is responsible for making sure that the public water supply within the United States is safe. However, EPA does not monitor or treat private well drinking water.

Sulfur bacteria are naturally present in groundwater, therefore the smell is most likely due to reactions occurring in your hot water and are not a threat to your health. While it is not necessarily dangerous for your water to smell like sulfur, it may signify high levels of pollution or chemicals.