How many people fit on a bus? School bus capacity depends on the mix of children and adults. However, for the purpose of planning, a large school bus can transport a maximum of 48 adult riders (2 per seat) or 72 children (3 per seat).

Coinciding with their seating configuration, school buses have a higher seating capacity than buses of a similar length; a typical full-size school bus can carry from 66 to 90 passengers. In contrast to a transit bus, school buses are equipped with a single entry door at the front of the bus.

You can expect an average school bus weight to be about 24,387 pounds (11,062 kg). When looking at the specs for different school busses, the weight will be typically listed as GVWR.

First offense is a fine of $150 to $250 and 1 point. Second offense is a fine of $500 to $1,000. Third offense is a license suspension for 1 year. Must stop at least 20 feet away from a school bus.

When a school bus is traveling on a roadway, you’re generally permitted to pass when it’s safe to do so, as it would with passing any other type of vehicle. When a bus is stopped for boarding, vehicles traveling behind or in oncoming lanes must stop (generally, at least 50 feet away from the bus).

According to California law, drivers must stop when a school bus stops in front of them and extends its stop sign with flashing lights. In California, the fine for passing a school bus can be up to $600, according to the California Highway Patrol. When a school bus stops on a two-lane road, all traffic must stop.

You must stop when you approach a school bus with flashing red lights activated and stop arm extended. If you are driving on a highway that is divided by a barrier or unimproved median, you are required to stop only if you are traveling in the same direction as the school bus.

The SCHOOL BUS STOP AHEAD sign (S3-1) is a warning sign used to alert motorists of an upcoming school bus stop that may be unexpected or obscured by roadway geometry, such as a curve or hill. The school bus stop cannot be relocated.

When you see a stopped local bus (1 point) you must stop if you are facing it. you must stop if you are directly behind it. wait for its lights to stop flashing. be alert for pedestrians near the bus.

If a bus is pulled off the roadway to pick up passengers you can legally pass the bus until it turns on its signal. Note that this law is specific to transit buses. You can pass if it doesn’t mess with any other vehicles traveling on the road in either direction.

FLASHING RED LIGHTS ON SCHOOL BUSES MEANS OTHER VEHICLES MUST STOP. A school bus stops to drop off children. These flashing lights mean the bus is picking up or discharging students and you need to STOP even on divided and multi-lane highways.

5.2 Friction & Traction Your 4 tires and their footprints that touch the road are the first and one of the most important parts to the control system. Friction- the force that keeps each tire from sliding on the road.

There are four basic elements of a typical motion control system. These are the controller, amplifier, actuator, and feedback. The complexity of each of these elements will vary depending on the types of applications for which they are designed and built.

Control is one of the managerial functions like planning, organizing, staffing and directing. It is an important function because it helps to check the errors and to take the corrective action so that deviation from standards are minimized and stated goals of the organization are achieved in desired manner.

A control system manages, commands, directs, or regulates the behavior of other devices or systems using control loops. It can range from a single home heating controller using a thermostat controlling a domestic boiler to large industrial control systems which are used for controlling processes or machines.

Three basic types of control systems are available to executives: (1) output control, (2) behavioural control, and (3) clan control. Different organizations emphasize different types of control, but most organizations use a mix of all three types.

A feedback control system consists of five basic components: (1) input, (2) process being controlled, (3) output, (4) sensing elements, and (5) controller and actuating devices. These five components are illustrated in Figure 1.…

There are three main types of internal controls: detective, preventative, and corrective. Controls are typically policies and procedures or technical safeguards that are implemented to prevent problems and protect the assets of an organization.

There are two types of control systems namely:

• Open loop control systems (non-feedback control systems)
• Closed loop control systems (feedback control systems)