Your average, simple concrete walkway can cost you anywhere from $25/m2 to $45/m2.

New South Wales and Western Australia have the highest concreting costs among all the states. Concreting jobs in New South Wales roughly cost $41.75/m2, while concreting services in Western Australia are at around $42.07/m2. However, the concreting prices in Australia can reach even $60 per square metre.

The average cost of building a concrete walkway is about $2,350, with a typical price range between $1,900 and $2,800. The average cost of a paver walkway is about $2,850, with a range ……Are you a Home Improvement or Service Pro?

A concrete walkway should be 4” thick, at a minimum. If you opt for less than 4”, you’ll experience more cracking sooner. Thicker concrete is always better, more stable, and has fewer cracks. It will also withstand weather and traffic better as 4” of concrete is much stronger than 3”.

Sidewalks should be wide enough to allow two adults to walk comfortably next to each other. A good standard width is 48 inches.

To calculate what you need, multiply the walkway’s width and length to find the square footage; for example a 4-foot-wide, 50-foot-long walkway covers 200 square feet. Next, factor in the thickness: 4 inches converts to 0.33 feet; multiply this by the square footage to find the cubic feet: 200 x 0.33 = 66 cubic feet.

How do I calculate how much concrete I need for a slab?

1. Measure the area in feet.
2. Multiply length by width, and then by thickness.
3. Divide the resulting number by 27 to find cubic yards.

Do Sidewalks Need Rebar? Most sidewalks don’t need to be reinforced with rebar. Rebar is a steel bar used to reinforce the strength of concrete used to withstand heavy weight. Rebar might also be used in sidewalks required to withstand impact on a regular basis.

Prices range from $1,907 (800 sq.ft. concrete sidewalk – DIY) to $4,041(800 sq.ft. concrete sidewalk – upgraded) and also vary depending on your zipcode:

For a basic project in zip code 47474 with 120 square feet, the cost to Install a Concrete Sidewalk starts at $8.37 – $10.28 per square foot* . Actual costs will depend on job size, conditions, and options.

Install a Concrete Sidewalk Costs. For your project in zip code 98104 with these options, the cost to install a concrete sidewalk starts at $7.83-$9.47 per square foot . Your actual price will depend on job size, conditions, finish options you choose.

The national average cost to install a concrete driveway is about $6 a square foot . According to Joe Pilson, owner of Complete Concrete in Denver, Colorado, a typical driveway big enough for one car and room to turn around is about 500 square feet, with an average total project cost of $3000 .