The conserver features a clear glue, which binds puzzle pieces together, ensuring that the image won’t fall apart over time.

Puzzle Conserver – Glue Puzzle Handy is a foldaway puzzle board, suitable for assembling most 1000 and 500 piece jigsaws.

HOW TO USE RAVENSBURGER PUZZLE CONSERVER

1. Shake the conserver well before use (glue particles sink over time).
2. Do not store the conserver at a temperature below 0° C.
3. If a puzzle is too damp during application, the cardboard may swell.

Puzzle Conserver Permanent is specifically designed for all Ravensburger puzzles, allowing you to glue and hang up your puzzle. The finished puzzle is then sealed and preserved so that the colours retain their brilliance.

If you can, pick up Mod Podge, a dedicated craft glue. As opposed to regular glue, puzzle glue combines an adhesive with a lacquer. It not only holds the puzzle together, it provides a protective gloss finish that dries clear every time.

Gloss finish is our standard default option for puzzles where we apply a gloss finish to your puzzles to protect the print on the puzzle as well as to enhance the printed colors. Matte finish is a more premium option where we apply a matte protection layer to the puzzle to create a more high end feel.

How do you seal glitter without losing sparkle?

1. Before you begin, tap off any excess glitter.
2. Apply a coat of decoupage medium to the project with a foam brush.
3. Allow to dry.
4. Apply a second coat of decoupage medium to the project.
5. Wait 24 hours, and your glitter is sealed!

If you are going to seal the glitter, use a very clear and glossy spray like Krylon Triple Thick Glaze, or a crystal clear liquid like Envirotex Lite. Both of these sealers will protect your glitter indoors and outdoors.

Hairspray is a fantastic option for sealing glitter on fabric! Simply hold the can of hairspray approximately ten inches away from the fabric item in question. Spray a light layer over the glittered sections, and allow to try.

If you need to touch up some spots or add another coat of glitter, apply another coat of Mod Podge or decoupage medium, apply the glitter, tap to remove it and allow to dry completely. Once the medium is totally dry, use more dishwasher safe Mod Podge or decoupage medium to seal the glitter to the glass.

Instructions

1. Clean each glass with mild soap and water; dry completely.
2. Brush each glass with an even coat of Mod Podge Dishwasher Safe.
3. While the glue is still wet, spread an even amount of bling all over the glass.
4. After pouring on the sparkle, allow your glasses at least two hours to dry completely.

If you don’t have Mod Podge, you could also use regular white school glue, though school glue often chips off easily over time. Fun ideas of things you can add glitter to: plates, mugs, containers, candles, fabric flowers, glasses frames, cell phone covers, wood, and notebooks or folders.

Gloss Mod Podge The gloss ones you can use to topcoat. Just be gentle with your brushing and not super thick so its dripping. With this method I recommend adding some glue to another container to apply as some of the glitter will transfer from the brushing.