An alternative to using a Christmas tree stand is to get a live potted tree. This enables you to have a live tree that you can plant once Christmas is over. One of the benefits of a live tree is that the pot serves as its stand.

4 ways to anchor your Christmas tree in a bucket or basket.

1. use drainage rocks to anchor the trunk in a bucket.
2. use the bottom branches of the tree to hold itself in place.
3. build a DIY concrete Christmas stand using a cheap 5-gallon plastic bucket and PVC pipe.
4. place a Christmas tree stand inside of your basket.

If you want to hide your fake metal base, use wire cutters to cut the bottom out of a basket and remove the handle, then place your tree stand inside and you’re all set. Loop bows are full of body, which is why they are essential when filling in spots that are sparse on your tree.

Fill in empty or dead space under your Christmas Tree with some decorative yarn wrapped foam balls.

Follow this rule of thumb: For every inch of the trunk’s diameter, fill the stand with one quart of water. Even though you’ve heard people talk about adding things like bleach, corn syrup, aspirin, and sugar to the water, tree preservatives and additives are probably unnecessary.

25 Great DIY Christmas Tree Stands And Bases

1. Buy a simple galvanized tub.
2. Measure your tree stand and make a plywood box that could hide it.
3. Take an old tire and apply thick jute rope to it using a glue gun. (
4. This is a simple woodworking project from pallet boards.
5. Buy a cheap but large basket.

Though your Christmas tree may be one of your most cherished Christmas traditions, tree stands can sometimes get last billing when it comes to your holiday decor. But we’ve got some ideas to pretty things up. While you can always opt for a classic tree skirt, you also might enjoy making your own DIY Christmas tree stand with a few basic supplies.

If you want to surprise and delight your holiday visitors, try putting your Christmas tree in a champagne bucket for a totally unique tree stand. Reclaimed wood makes this box almost free to build!

On top of the 1 x 12-inch sections, create a frame with the 1 x 2-inch sections. The 24-inch sections make the top and bottom of the frame. The 8 1/2-inch sections make the side of the frame. Next, evenly space the remaining three 8 1/2-inch sections vertically inside the frame.

You can replace your metal tree stand with this crafty wooden project. It’s made of specially-shaped small blocks of wood that’s made into a stand and makes for a perfect DIY alternative to a regular stand that requires a tree skirt to make it look appealing. via finditmakeitloveit