To voice a dissenting opinion that will most likely cause conflict. “He made waves over the new policy.”

: to move one’s hand as a way of telling someone that one does not want help We offered to help but he waved us off.

to walk through water, snow, sand, or any other substance that impedes free motion or offers resistance to movement: to wade through the mud.

The wave is the disturbance (people jumping up and sitting back down), and it travels around the stadium. However, none of the individual people in the stadium are carried around with the wave as it travels – they all remain at their seats.

1 : to motion with the hands or with something held in them in signal or salute. 2 : to float, play, or shake in an air current : move loosely to and fro : flutter flags waving in the breeze. 3 of water : to move in waves : heave. 4 : to become moved or brandished to and fro signs waved in the crowd.

Light waves across the electromagnetic spectrum behave in similar ways. When a light wave encounters an object, they are either transmitted, reflected, absorbed, refracted, polarized, diffracted, or scattered depending on the composition of the object and the wavelength of the light.

There are two basic types of wave motion for mechanical waves: longitudinal waves and transverse waves. The animations below demonstrate both types of wave and illustrate the difference between the motion of the wave and the motion of the particles in the medium through which the wave is travelling.

The EM spectrum is generally divided into seven regions, in order of decreasing wavelength and increasing energy and frequency. The common designations are: radio waves, microwaves, infrared (IR), visible light, ultraviolet (UV), X-rays and gamma rays.

Waves come in two kinds, longitudinal and transverse. Transverse waves are like those on water, with the surface going up and down, and longitudinal waves are like of those of sound, consisting of alternating compressions and rarefactions in a medium.

The different types of waves have different uses and functions in our everyday lives. The most important of these is visible light, which enables us to see. Radio waves have the longest wavelengths of all the electromagnetic waves. They range from around a foot long to several miles long.

The highest frequency colour, which is violet, also has the most energy when it comes to visible light. The lowest visible light frequency, which is red, has the least energy. There is more energy in higher-frequency waves. Gamma rays have the shortest wavelengths and highest frequencies of all electromagnetic waves.

Violet

In modern Morse code, J, Y, and Q are least frequent.

So the lowest frequency in the electromagnetic spectrum is the frequency corresponding to the lowest energy a photon can have, which is not zero but still very very small (the exact number is indeterminable).

Calculating the Midpoint The average of the class limits is (180 + 199) / 2 = 189.5. This is your midpoint. You might see the class mark defined as the average of the class boundaries as well. You’ll get the same result.

To find the upper limit of the first class, subtract one from the lower limit of the second class. Then continue to add the class width to this upper limit to find the rest of the upper limits. Find the boundaries by subtracting 0.5 units from the lower limits and adding 0.5 units from the upper limits.

Answer. Answer: The difference between the highest and lowest observations in a given data is called its Range.

Dear Student, The answer to this question is Option 2 ( Range). The difference between the highest and the lowest value of the observation is called Range.

The range is the difference between the highest and lowest value in a set of values.

The Range is the difference between the lowest and highest values.

The minimum is the smallest value in the data set. The maximum is the largest value in the data set.

mode

The range of a numerical set of data is the difference of the greatest value and the least value. In other words, the largest number minus the smallest number is the range. If we are given a list of data find the largest and smallest number and subtract them.

D. 900001. Hint: The smallest 6 digit number is 100000 and the greatest 4 digit number is 9999. The smallest 6 digit number is 100000 because when we subtract 1 from 100000, we get a 5 digit number.

The range is the difference between the smallest and highest numbers in a list or set. To find the range, first put all the numbers in order. Then subtract (take away) the lowest number from the highest. The answer gives you the range of the list.

Calculate the smallest or largest number in a range

1. Select a cell below or to the right of the numbers for which you want to find the smallest number.
2. On the Home tab, in the Editing group, click the arrow next to AutoSum. , click Min (calculates the smallest) or Max (calculates the largest), and then press ENTER.

Use the IF function, one of the logical functions, to return one value if a condition is true and another value if it’s false. For example: =IF(A2>B2,”Over Budget”,”OK”) =IF(A2=B2,B4-A4,””)

To find the maximum or minimum value of a quadratic function, start with the general form of the function and combine any similar terms. For example, if you’re starting with the function f(x) = 3x + 2x – x^2 + 3x^2 + 4, you would combine the x^2 and x terms to simplify and end up with f(x) = 2x^2 + 5x + 4.

The MAXIFS function can be used to find a maximum value in data after applying one or more criteria. Conditions are applied using range/criteria pairs. MAXIFS can handle up to 126 range/criteria pairs.