The portable abrasive blaster kit comes with a blast gun, 15 ft. material hose and hopper than can hold up to 50 lbs. of abrasive media, including steel grit, glass beads, pecan shells and more. Just hook it up to a 1 HP or larger compressor and easily remove paint, rust, graffiti, corrosion and scale.

Soda blasting is often better for cleaning surfaces, especially when it comes to wood and easily damaged materials. While sandblasting should be used for especially difficult rust or paint removal, soda blasting can be perfect for this process in situations where a lighter blasting is needed.

If performed personally on private property away from others, no federal laws restrict the sandblasting act. However, sandblasting performed for commercial purposes is subject to regulation by the Federal Occupational Safety and Health Commission (OSHA).

Air and sand are pushed through the canister and into the gun together. Siphon Sandblasters: A siphon sandblaster features two hoses. When compressed air flows through the first hose, it creates pressure which pulls sand from a tank through the second hose. The air and sand then exit the sandblasting gun together.

The average sandblasting company will charge $40 to $65 dollars per hour of labor. Specialty services will cost over $75 per hour. These types of services include extra preparation, special abrasion materials, and job design. Materials cost for sandblasting costs about $50 per 50 pound bag.

Removing stubborn rust from steel requires more than elbow grease and cleaners. Sandblasting is the most effective way to get rid of rust and reveal the pristine steel beneath. Operating a sandblaster requires finesse to ensure that the metal is not scratched or pitted in the rust-removal process.

Compared to sandblasting, vapor blasting reduces abrasive consumption. Thus, it delivers a more cost-effective surface prep option. Although both sandblasting and vapor blasting can cause corrosion problems, the metal surfaces prepared by vapor blasting tend to corrode faster.

While those are good for some jobs such as nailing, for sandblasting you want an air compressor that has a minimum of around 10 CFM. Ideally, you would find one that goes up to 20 CFM. Because sandblasting is such a high-intensity job, having an air compressor with a high CFM is crucial.

Sand blasting is also known as abrasive blasting, which is a generic term for the process of smoothing, shaping and cleaning a hard surface by forcing solid particles across that surface at high speeds; the effect is similar to that of using sandpaper, but provides a more even finish with no problems at corners or crannies.

Soda blasting is a safe paint stripping and cleaning process that uses bicarbonate -of- soda media delivered by means of compressed air through a specially designed pressurized blasting pot system onto the area to be cleaned. It removes paint and contaminate without harming the underlying surface.

Smooth a rough surface

Insert your arms and position yourself so that you have a clear view into the cabinet. Position your foot in the foot pedal mechanism. Once you depress the pedal the media (sand) will blast from the gun.