A Geyser is an example of Geothermal energy. Hot springs, lava, and fumaroles are natural examples of geothermal energy. Geothermal power is currently more common in homes and businesses, using geothermal heat pumps to control the temperature in the building.

Experts say geothermal energy is cleaner, more efficient, and more cost-effective than burning fossil fuels, and it can reduce our dependence on foreign oil. Geothermal plants are also considered to be more reliable than coal or nuclear plants because they can run consistently, 24 hours a day, 365 days a year.

Geothermal energy is heat within the earth. The word geothermal comes from the Greek words geo (earth) and therme (heat). Geothermal energy is a renewable energy source because heat is continuously produced inside the earth. People use geothermal heat for bathing, to heat buildings, and to generate electricity.

There are four main kinds of geothermal resources: hydrothermal, geopressured, hot dry rock, and magma. Today hydrothermal resources are the only kind in wide use. The other three resources are still in the infant stages of development.

Most of the geothermal power plants in the United States are in western states and Hawaii, where geothermal energy resources are close to the earth’s surface. California generates the most electricity from geothermal energy.

Geothermal energy originates from the heat retained within the Earth since the original formation of the planet, from radioactive decay of minerals, and from solar energy absorbed at the surface.

Magma heats nearby rocks and underground aquifers. Hot water can be released through geysers, hot springs, steam vents, underwater hydrothermal vents, and mud pots. These are all sources of geothermal energy. Their heat can be captured and used directly for heat, or their steam can be used to generate electricity.

Archaeological evidence shows that the first human use of geothermal resources in North America occurred more than 10,000 years ago with the settlement of Paleo-Indians at hot springs. The springs served as a source of warmth and cleansing, their minerals as a source of healing.

How deep do you have to dig? For a horizontal loop you only need to dig between 6 – 8 feet deep. For a vertical loop you need to drill between 250 and 300 feet deep.

We would not recommend planting trees over where ground loops are installed for 2 primary reasons: Tree root systems can grow into the loops. It may be difficult to repair or add to the piping system without damaging the tree.

The lake or pond should be at least 1 acre (40,000 square feet) in surface area for each 50,000 Btu per hour of heat pump capacity. Another way to measure is to have a volume of water available that is the same volume as the structure being cooled or heated.

Vertical ground loops are appropriate for situations in which there is little ground area available for the loop installation. Whereas horizontal loops are installed wide, vertical loops are installed deep.

about 400 to 600 feet

Geothermal energy is the heat that comes from the sub-surface of the earth. It is contained in the rocks and fluids beneath the earth’s crust and can be found as far down to the earth’s hot molten rock, magma.

On average, a homeowner can expect total expenses to reach between $18,000 to $30,000 on geothermal heating and cooling cost. This cost would cover a complete geothermal installation. The price can range from $30,000 to $45,000 with high-end ground-source heat pump systems for large homes.

In predominantly rainy or cloudy climates, solar panels will lose efficiency and may provide unpredictable service. Because geothermal energy provides up to 500% efficiency compared to gas or oil heating, it’s highly recommended over solar power in colder areas.

A geothermal heating and cooling system works well in tandem with solar panels because the geothermal heat pump helps regulate your home’s temperature using the electricity provided by your solar panels. Solar and residential geothermal produce different kinds of energy for the home without producing any emissions.

This energy source is more environmentally friendly than conventional fuel sources. The largest single disadvantage of geothermal energy is that it is location specific. Geothermal energy runs the risk of triggering earthquakes. A sustainable source of energy as its always available unlike wind and solar.

Top countries producing geothermal power

• US. With an installed capacity of 3,639MW in 2018, the US is the leading producer of geothermal energy across the world, producing 16.7 billion kilowatt hours (kWh) of geothermal energy throughout the year.
• Indonesia.
• Philippines.
• Turkey.
• New Zealand.
• Mexico.
• Italy.
• Iceland.

Geothermal energy is physically reliable because it is consistent, efficient, and can easily accommodate changes in electricity demand.

Geothermal energy can heat, cool, and generate electricity: Geothermal energy can be used in different ways depending on the resource and technology chosen—heating and cooling buildings through geothermal heat pumps, generating electricity through geothermal power plants, and heating structures through direct-use …

Geothermal hot water can be used for many applications that require heat. Its current uses include heating buildings (either individually or whole towns), raising plants in greenhouses, drying crops, heating water at fish farms, and several industrial processes, such as pasteurizing milk.

There are three geothermal power plant technologies being used to convert hydrothermal fluids to electricity—dry steam, flash steam and binary cycle. The type of conversion used (selected in development) depends on the state of the fluid (steam or water) and its temperature.

Geothermal energy is also used to directly heat individual buildings and to heat multiple buildings with district heating systems. Hot water near the earth’s surface is piped into buildings for heat. A district heating system provides heat for most of the buildings in Reykjavik, Iceland.