A printer is a device that accepts text and graphic output from a computer and transfers the information to paper, usually to standard size sheets of paper. Printers vary in size, speed, sophistication, and cost. In general, more expensive printers are used for higher-resolution color printing.

A typical printer should have all the basic parts in order to carry out the printing process successfully, and they are:

• Paper support.
• Sheet feeder.
• Printer cover.
• Output tray.
• Output tray extension.
• connectors.
• Edge guides.
• Control Buttons.

Types of Printers

• Laser Printers.
• Solid Ink Printers.
• LED Printers.
• Business Inkjet Printers.
• Home Inkjet Printers.
• Multifunction Printers.
• Dot Matrix Printers.
• 3D Printers.

Primary Components of a Laser Printer

• Paper Transport.
• Logic Circuits.
• User Interface.
• Toner and Toner Cartridges.
• Photosensitive Drum.
• The Laser.
• Primary Corona.
• Transfer Corona.

The laser printing process can be broken down into seven major steps:

1. Step 1: Sending.
2. Step 2: Cleaning.
3. Step 3: Conditioning.
4. Step 4: Exposing.
5. Step 5: Developing.
6. Step 6: Transferring.
7. Step 7: Fusing.

What is another word for laser printer?

A laser printer is a popular type of personal computer printer that uses a non-impact (keys don’t strike the paper), photocopier technology. When a document is sent to the printer, a laser beam “draws” the document on a selenium-coated drum using electrical charges.

Inkjet printers spray liquid ink onto paper in tiny, precise drops. These printers usually use either thermal technology (using tiny chambers of ink that heat up) or piezoelectric crystals (which vibrate or change shape when charged) to propel tiny ink droplets onto a page to create the printed text or images.

Transfer corona wire: The transfer corona wire gives the paper a positive electrical charge that is used to attract the toner to the paper.

The three most common forms of impact printers are dot-matrix, daisy-wheel, and line printers.

Whilst all printers will make a noise to some extent, the crown for the noisiest type of printer must go to the dot matrix printer.

5.1. Learning about Paper Feeder Mechanisms

• Continuous form feed.
• Friction-feed.

Laser printers

Noun. 1. computer paper – paper folded to permit continuous printing controlled by a computer. paper – a material made of cellulose pulp derived mainly from wood or rags or certain grasses.

impact matrix printing

While they don’t tend to be used in those environments now, dot matrix printers are still a great choice for manufacturing businesses today as they can use carbon paper to produce multiple copies of a document.

Different types of Dot Matrix Printers According to number of pins or dots used per letter, there are mainly 3 types of printers – 9 pin, 18 pin and 24 pin. Based on the movement of print head, there is 80 column printers and 132 column printers.

Dot matrix printers are a lot like inkjet printers. They work by implementing a moving head that prints in a line by line motion. However, in contrast to inkjets, dot matrix printers employ an impact ‘head and ribbon’ method of printing.

In June 1978, the Epson TX-80/TP-80, an 8-pin dot-matrix printer mainly used for the Commodore PET computer, was released. This and its successor, the 9-pin MX-80/MP-80 (introduced in 1979/1980), sparked the popularity of impact printers in the personal computer market.

Advantage and Disadvantage of Dot-matrix Printer

• 1) Can print on multi-part forms or carbon copies.
• 2) Low printing cost per page.
• 3) Can be used on continuous form paper, useful for data logging.
• 4) Reliable, durable.
• 1) Noisy.
• 2) Limited print quality.
• 3) Low printing speed.
• 4) Limited color printing.

Meghraj Dot Matrix Printer Paper Continuous 10x12x2=12″ 80 gsm, 8……Sentur Sunshine Unruled 10″X12″ Dot Matrix 70 gsm Printer Paper (Set of 1, White)

Answer. The main reason why people still buy dot-matrix printers is that because they use an impact technology they can be used with multipart forms. The pressure of the needle against the ribbon is transferred through the top copy to the carbon paper or carbonless paper beneath it.

Our top pick, the LQ-2090 Dot Matrix Printer by Epson, is among the best options available, but there are plenty of other models available catering to various needs and spaces.

Smartform – Change CPI (Characters per Inch ) for Dot Matrix printer.

Darken logos and other printed graphics that you create using the DFNCHR keyword. Place more data in less space on printed forms. Fit the appearance of a form to your needs.

Plain paper for dot matrix printers. The most popular sizes are 279 x 241mm (11 x 9.5″) and 279 x 368mm (11 x 14.5″) which is for wide carriage machines (132 column). Only available for wide carriage machines and in single part paper.

Compare with similar items

1. Select Windows Start menu > Printers and Faxes.
2. Select File > Server Properties.
3. In the Print Server Properties window, select the Create a new form check box.
4. Type the form name.
5. In the Form description (measurements) fields, enter the paper size.
6. Access the form printing window, and click Setup.

Dot-matrix printers vary in two important characteristics: speed: Given in characters per second (cps),the speed can vary from about 50 to over 500 cps. Most dot-matrix printers offer different speeds depending on the quality of print desired.

Dot Matrix Printer With a USB Connection

1. Install any software drivers included with the dot matrix printer.
2. Connect the printer to the computer using the USB cable.
3. Turn the printer on.
4. Install the printer manually if it does not install automatically.