Four basic processes are involved in the formation of a clastic sedimentary rock: weathering (erosion)caused mainly by friction of waves, transportation where the sediment is carried along by a current, deposition and compaction where the sediment is squashed together to form a rock of this kind.

Even if you don’t have any other filtration system installed, sediment filters will protect and prolong the life of your household appliances. If you use a private well as your water source, whole house sediment filtration is advisable.

every 3 to 6 months

Sediment increases the cost of treating drinking water and can result in odor and taste problems. Sediment can clog fish gills, reducing resistence to disease, lowering growth rates, and affecting fish egg and larvae development.

Depending on the mineral content of your local water supply, sediment may build up over the course of a year, or five years. Hot water heater sediment symptoms are not always obvious. Let’s take a look at the common signs of sediment in your hot water heater before it’s too late.

Sediment can consist of sand, rocks, and minerals, or may consist of organic particles of plants and microbes. Sediments may appear in well water as color or cloudiness which may or may not settle on the bottom of containers.

A sediment filter can trap dirt, silt, sand and other particulates out of your water. An inline sediment prefilter should be installed near the point where the water service line enters the house and before the water softener system.

All in all, with all steps considered, it will typically take between 1 and 2 weeks to have a new well completely up and running. Of course, depending on several factors, it could take shorter or longer than this.

Pool chlorine tablets can be used in wells. Ground wells require maintenance just as other household components and one of the most important tasks is disinfecting it. Disinfecting a ground well involves adding chlorine which kills bacteria and microscopic organisms living in the water.

The quality of your water depends on several factors including geology and water levels. In order to allow for maximum ground filtration to remove impurities, your well depth should be at least 100 feet. As a general rule, the deeper you drill, it’s more likely that there will be minerals present.

The average cost to redrill a well deeper is $3,000 to $6,000, or between $35 and $84 per foot, which is the same as drilling a new well. Hydrofracturing is another method used to increase water flow and costs $1,500 to $3,000. Explore both options before drilling.

5 gpm (two fixtures running simultaneously at 2.5 gpm) is a good estimate of peak demand, for the typical household. Water wells that reliably yield 5 gpm should be able to meet peak and daily needs for most residences. Wells yielding less than 5 gpm, however, are sometimes the only water source available.