A spreader beam is a simple device consisting of a long bar that holds two slings apart. It’s designed to convert lifting loads into pure compressive forces and also spread apart the legs of a sling.

When Using Lifting Beams and Spreaders Always: Ensure the load will remain stable when lifted. Ensure that no one lifting point becomes overloaded by the slinging or handling methods. Use tag lines to control long loads. Use lifting beams to handle loads other than those for which they are designed.

You should be aware that OSHA and ASME require a documented Periodic inspection of your lifting and rigging equipment every 12 months (at a minimum) and monthly to quarterly inspections in more severe service conditions, based on the following criteria: Frequency of use. Severity of service conditions.

A spreader is a device used for lifting containers and unitized cargo. The spreader is placed between the container and the lifting machine. A spreader can be used on a container crane, a straddle carrier and with any other machinery to lift containers.

A spreader bar is a type of below-the-hook lifting device used to aid crane operators in picking up large and sometimes heavy loads. The idea behind a spreader bar is to simply distribute the load of a lift across more than one point, increasing stability and decreasing the loads applied during hoisting.

Broadcast spreaders are the most efficient as they provide good lawn coverage. This opens in a new window. It should be noted that a broadcast spreader spreads granular product or grass seed at the rate you walk at.

Calibrating Your Spreader

1. Divide 100 by the square foot the bag of fertilizer covers.
2. Multiply the weight of the bag by this number.
3. The answer is the amount of fertilizer needed to cover 100 sq. ft.
4. Place this amount in the spreader.
5. Mark off a 10 ft. x 10 ft. area.
6. Apply using the suggested setting.

Almost all of your lifting, rigging and height safety equipment that you use needs to be tested and tagged by a “competent person”. This equipment needs to be visually inspected by a “competent person” at least every 6 months.

Each hoist manufacturer’s manual will tell you how to measure the hook. Look for excessive wear or corrosion on the hook. Any wear exceeding 10% of the original section dimension of the hook or its load pin means the hook should be removed from service.

A spreader is a device used for lifting containers and unitized cargo. The spreader is placed between the container and the lifting machine. The spreader used for containers has a locking mechanism at each corner that attaches to the four corners of the container.

Beams spreader beams are our flagship product, and spreader beams also plate lifting beams. Lifting beam and spreader beam ligting they are devices in all industrial sectors. Beams and lifting are most our product selling and lifting beams are designed by our engineers and certificates and lifting beams.

M & W Low Headroom Multiple Length Lift Beams Provide Secure, Flexible Lifting For 1,000 To 40,000 Lb. Load Applications.M & W Low Headroom Multiple Length Lift Beams are constructed $897.00 – $4,848.00

A spreader bar, also known in the industry as a spreader beam, is designed for use with a sling that connects the lifting machine hook to the ends of the beam. The beam typically has connection points on the underside that hook to the cargo for lifting.

Fixed Length Lifting Beams are constructed of heavy duty steel for… M&W Fixed Spread Beams Ensure Safe And Flexible Industrial Lifting. M&W Fixed Spread Beams are made of solid alloy steel for strength and long lasting durability.