(Entry 1 of 2) 1a : of, relating to, or occurring in the air or atmosphere the aerial acrobatics of circus performers. b : existing or growing in the air rather than in the ground or in water aerial plants.

The definition of aerial is something that is in or from the air. An example of something that is aerial is a picture taken from a helicopter.

aerialadjective. Synonyms: aeriform, gaseous, vaporous, ethereal, airy, empyreal, light.

An antenna is used for transmitting radio waves, whether used for radio, television, cell phones or other more sophisticated equipment. Aerials are used for reception, not for transmission. The most common use which most people would be accustomed to is the aerial that is used for a car radio.

What is another word for aerial view?

What is another word for bird’s-eye view?

What is another word for side view?

A worm’s-eye view is a view of an object from below, as though the observer were a worm; the opposite of a bird’s-eye view.

Aerial in a Sentence 🔉

1. An aerial view of the city showed just how cluttered and crowded the metropolitan area looks from above.
2. Lost in an aerial expedition, Amelia Earhart’s plane was never recovered.
3. During the aerial attack, bombs were dropped from the sky and exploded over Baghdad.

In this context, the word “profile,” as defined by Merriam-Webster, means either “a representation of something in outline… Face profile (which basically means the side-view of a person) is usually taken to get a clear look of one’s jawline, nose, and etc.. …

2 : a view of a person or object presenting a side instead of a front toward the observer or camera : a profile view.

In geometry and science, a cross section is the non-empty intersection of a solid body in three-dimensional space with a plane, or the analog in higher-dimensional spaces. Cutting an object into slices creates many parallel cross-sections.

Which is better: a cross section (spaced) or a cross-section (hyphenated)? Dictionaries give either the former, or the latter, or together as variants. Verb: only “to cross-section,” adjective: only “cross-sectional.”

What is another word for cross section?

Cross sections are a power tool that ensures high quality production and products. Preparation of a cross section is a destructive process, a section of the production panel is cut out, in most cases a specially designed Test coupon is used (these are placed on every panel).

Cross sections are line graphs that show a sideways view of a landscape. They can show features such as hills and valleys, or depths, such as the depth of a river. Cross sections of hills use contour lines to determine the height of the land.

A cross section, also simply called a section, represents a vertical plane cut through the object, in the same way as a floor plan is a horizontal section viewed from the top. A sectional elevation is a combination of a cross section, with elevations of other parts of the building seen beyond the section plane.

Types of Cross Section Any cross-section of the sphere is a circle. The vertical cross-section of a cone is a triangle, and the horizontal cross-section is a circle. The vertical cross-section of a cylinder is a rectangle, and the horizontal cross-section is a circle.

Pipe cross-sectional area is the area of a circle as seen when looking at the end of a pipe. The area varies directly with the square of the inside diameter. When one speaks of a one inch pipe, it is a nominal one inch; the true inside diameter usually is not 1 inch.

The earliest known drawings date from 30,000 to 10,000 B.C.. They were found on the walls of caves in France and Spain. Other examples of early drawing are designs that were scratched, carved, or painted on the surfaces of primitive tools.

Steps to Drawing a Cross Section

1. Draw the House Envelope. Start by drawing the width of the outer envelope of your house design through a given cross section line.
2. Draw Floors and Ceilings.
3. Side Wall Windows, Doors and Framing.
4. Interior Walls and Structural Elements.
5. Facing Wall Windows and Doors.
6. Labeling.

Cross sections are necessary for measurement of earthwork volumes in. roadway construction. They are profile views of the ground, perpendicular. to the centerline or base line, and indicate ground elevations at points of.

The profile is the vertical aspect of the road, including crest and sag curves, and the straight grade lines connecting them. The cross section shows the position and number of vehicle and bicycle lanes and sidewalks, along with their cross slope or banking.

Classification of Roads and their Details [PDF]

• Earthen Roads.
• Gravel Roads.
• Murrum Roads.
• Kankar Roads.
• WBM Roads.
• Bituminous Roads.
• Concrete Roads.
• National Highways.

Kerbs are the component of a city road. A kerb also termed as a curb is a vertical or sloping member provided along the edge of a pavement or Shoulder to give strength and protect the edge of the pavement. The meaning of kerbs or curbs is a barrier or boundary.

four layers

The selection of the pavement and gravel thickness is based on three criteria (Figure 3): (1) the thickness of the asphalt pavement is 0.1 m and the gravel base thickness is 0.2 m, which is shortened to 10 to 20 types; (2) the thickness of the asphalt pavement is 0.18 m and the gravel base thickness is 0.2 m, which is …