As a general rule, it’s best to take a break of at least 15 minutes every two hours, and to not drive for more than eight hours in a day, to ensure you stay alert and avoid the associated risks of driving for too long without a rest.

There are only 3 fixed rules to travelling:

• Have a positive attitude and approach.
• Do your background research.
• Don’t over-plan.
• Travel Off Season.
• Take time off if you’re on business travels.
• Plan how you’re going to stay in touch, ahead of your trip – Use the Forbesfone Travel SIM.

plan ahead and combine short trips into one slightly longer one. make a routine pre-driving check of tires, lights and controls. you should keep in mind that reducing hazards is more important than saving time. addresses and street names should be written down and brought along.

So let a mechanic give your car the once-over a week or two before your trip. In a safety inspection, a mechanic will check everything from fluid levels, belts, and hoses to lights, tires, and brakes to make sure your car is ready for the road.

Generally speaking, long drives will not damage your car. However, your auto wears off with every mileage it accumulates. If you’re not diligent in maintenance, then it may not even take a long road trip for your engine to start sputtering.

You can break in a new car on a road trip. Just make sure you get the first scheduled service out of the way before you leave if the miles you will put on the car during the trip take you past the first scheduled service.

10 things you should never do in a brand-new car

• Don’t put the pedal to the metal right off the starting block.
• Don’t max out your RPMs.
• Don’t use cruise control.
• Don’t do a lot of short distance travel.
• Don’t tow.
• Don’t let the gas go below a quarter tank.
• Don’t fill up with premium gas.
• Don’t skip the Top Tier gasoline mark when filling up.

Techniques for Breaking in a New Car

1. Avoid Extreme Acceleration. When you get your new ride, we know the first thing you want to do is floor the accelerator when you get out on the open road.
2. Vary Your Engine Speed.
3. Avoid Hard Braking.
4. Avoid Short Trips Which Don’t Give the Engine Time to Warm Up.

Do you need to break in a new car? Yes, you do. However, the first 500 miles is considered to be a sufficient break-in period. According to the experts, following proper break-in procedures when getting a new car allows the piston rings to seal properly against the cylinder bores.

Make sure you change your new car’s oil and filter for the first time at 1500 miles unless otherwise recommended by the manufacturer. The reason? Metal has worn off while mating surfaces were established, and those metal scraps need to be removed from the engine before they cause long-term damage.

It used to be normal to change the oil every 3,000 miles, but with modern lubricants most engines today have recommended oil change intervals of 5,000 to 7,500 miles. Moreover, if your car’s engine requires full-synthetic motor oil, it might go as far as 15,000 miles between services!

A: Most new cars don’t require running-in, but you certainly won’t do your engine any harm by taking it easy for the first few hundred miles. Change gear as early as you can and keep speeds low during this time and you’ll go a long way to extending the life of your engine.

Generally for the first 500-1000 miles new engines are tight and will use a bit more fuel. You will see that the maker tels you not to exceed certain revs until the engine has bedded in. Years ago older engines had to be carefully run in up to max speeds for mileage covered.

Is it true that a brand new car consumes more fuel than the one that has run for few years? Yes, that is true. If you track your mileage from new, you will see a marginal increase in mileage over the first year of ownership, give or take, depending on how much you use the car.

Most manufacturers recommend that you do a few miles (500-750) solo before subjecting the engine to a heavy prolonged loading when towing. If you really have to tow, then keep the engine as lightly loaded as possible.

You can use your cruise control on the very firstt day you buy a new car, and it will have no ill effects on your vehicle. So you go ahead and cruise away, and don’t worry about a thing. Cruise Control is going to set your new car’s RPM at one constant Point,For Example; 3,200RPM.

It may seem appealing to test the new car’s limit by towing. After all, it’s hard to imagine what harm it can do to something that needs a break-in. But what it actually does is push the engine so that it is overworked. Towing can be done safely once you are past the magic 1500km break-in period.

Yes, it will. That’s the way you have to be thinking if you care about the break-in period. You should wait until 2,000 miles at the very least. It’s harder for the engine to move all those new parts.

Some vehicles come made with a towing package that is designed for safe towing. What happens when you pull a trailer that’s too heavy for your vehicle? Engine damage from overheating, undue stress to the frame, damage to the suspension and braking systems, and transmission damage from overheating.

5 Steps To Break-In Your New Car Or Truck From Wentworth’s Wilsonville Chevrolet

1. Get Your Oil Changed After The Break-In Period Ends.
2. Keep Your Truck Below 55 MPH For The First 500 Miles.
3. Avoid Hard Stops For The First 200 Miles.
4. Vary Engine Load For The First 500 Miles.
5. Avoid Full Throttle For The First 500 Miles.

More short-distance driving will occur during maintenance and examination and while the car is being parked at the dealership. In total, a new car usually has at least 10 or more miles on the odometer.

If you don’t hoon your car, but simply ignore the break in procedures and drive to work and whatnot, you’ll probably sell your car before anything goes wrong with the engine. In older engines strictly following the break-in procedures was far more important due to less advanced materials and less consistent tolerances.

Many major truck brands recommend that you don’t drive faster than 70mph during your first 500 miles. For example, the new Ford F-150 guide recommends breaking in the engine for the first 1,000 miles. Driving at high speeds can hinder the ability for your automatic transmission to break-in properly.

Most experts consider the first 500 miles as a reasonable and sufficient break-in period. The reasoning behind this practice is that keeping revs relatively low helps the piston rings seal against the cylinder bores properly.

While out on your drive, bring the engine up to 3,000 RPM and then coast back down to 20 MPH about five or six times. Next, bring it up to 5,000 RPM and then coast back down to 20 MPH a couple of times. To play it safe, drive the next 500 miles without exceeding 5,000 RPM.

In general, run the engine under light-to-moderate loads for about 500 miles. Again, that duration is a rule of thumb, but break in shouldn’t exceed 1,000 miles. Then, drain the break-in oil, install the synthetic oil of your choice and commence driving.

At first start up, keep the engine just above idle and give it a few revs up and down. This power on and power off RPM breaks in the piston and rings evenly on the intake and exhaust sides. If air cooled, once the engine builds up heat where it becomes too hot to touch, shut the engine off.

Owners of new cars should read the scheduled maintenance book that comes with the owner’s manual and follow it. Decades ago most manufacturers recommended a change after 1000 miles and every 3,000 miles thereafter.

AMSOIL Synthetic Motor Oil can be used during break-in trouble free. Since most new vehicles come filled with petroleum oil, it only makes good sense to change to AMSOIL at the first scheduled oil change interval. New engine components generate high levels of wear metals and can contain contaminants from assembly.

Top 4 Engine Break-in Oils of Our Choice

• Lucas Oil LUC10063 Engine Break-in Oil, 16 Fluid Ounces.
• Lunati DRV01806 5W-30 Driven High Zinc Break-in Oil, 1 Quart.
• Red Line 81403 Engine Break-in Oil, 16 Ounce, 1 Pack.
• Motul 2810 QTA 10W-40 Break-in Oil-1 Quart Bottle.