Excessive salt usage can oftentimes be the result of leaking valves or improper controls leading to overflowing brine systems, causing highly concentrated and highly valued salt water to be lost before even entering the regeneration process.

Another method for adjusting the salt dose or the amount of salt used during a water conditioner backwash/regeneration cycle [on some water softener models] involves adjusting the float level inside the brine tank. Explanation of this feature has moved to WATER SOFTENER BRINE TANK FLOAT LEVEL ADJUSTMENT.

A house with four people if softener is sized correctly a 45,000 or 60,000 grain unit a little more than a 50Lb. bag a month. If you are using multiple bags per month and you have city water probably your softener is not working properly, or it is sized incorrect for your household.

Improperly Sized System A water softener should regenerate every 2 days to keep the resin bed active. But if you’re using less water in your house than your softener accommodates for, you could end up wasting salt in the resin, which may have a capacity that’s too large for your daily water consumption.

Be sure to reset your salt level indicator each time you add salt to the system. Press the RECHARGE button and hold for three seconds, until “RECHARGE NOW” begins to flash in the display, starting a recharge. This recharge draws the sanitizing bleach or brine into and through the water softener.

Adding too much salt to your water quality softener can cause salt “bridging,” or a buildup and solidification of regenerant. This buildup can prevent your system from regenerating properly.

You’ll need to refill the salt once every two to three months. This salt can either be coarse or in pellet form; either way, you’ll find it at your local grocery store.

Checking the salt level is easy! Simply remove the lid to your brine tank and take a look. If you see water at the bottom of your brine tank, it’s time to add more salt (or regenerant) .

Your water level should always be slightly lower than your salt level in your water softener brine tank. This is because the water needs to touch the salt so that it can absorb it and create the correct concentration of brine. That is why it is important to always make sure that your water is lower than the salt.

Check your RainSoft water softener once a month to ensure it maintains acceptable salt levels in the unit’s brine tank. If you need to add more salt, you should do so and then reprogram the water softener to input the new salt level.

If these manuals are not suitable for your model, you can try calling the RainSoft customer number 1-800-860-7638. If this is not possible, then try sending an e-mail to customer services via [email protected] RainSoft water softeners are prone to salt problems.

When the water softener reaches the brine tank fill cycle, it will put a pre-determined amount of water into the salt tank. If there is water in the salt tank that has been left over, the level of the water will be higher than before. This means more salt can be dissolved.

We received a quote from Rainsoft for there smart system EC5 which would be for 2 units and a salt machine for $6,495. They told me it has a lifetime warranty and only every 10 years I would need maintenance for $150.