Castles had openings high in the walls so that archers could shoot at invaders. Some castles were surrounded by a moat which was a deep ditch filled with water. A small bridge was built to lower and raise as needed over the moat.
Q. What are the windows in a castle called?
embrasures
Table of Contents
- Q. What are the windows in a castle called?
- Q. What is the biggest room in a castle?
- Q. What was the most important room in any castle?
- Q. What is the weakest part of a castle?
- Q. Which was the safest part of a castle?
- Q. How many soldiers defend a castle?
- Q. Why did Normans build castles?
- Q. Where did soldiers sleep in castles?
- Q. How did they keep castles warm?
- Q. Did old castles have glass windows?
- Q. Did castles have wooden floors?
- Q. Why did they use rushes on the floor?
- Q. How comfortable are castles?
- Q. Why did they put straw on Castle floors?
- Q. Did medieval people have carpet?
- Q. What does dirt floor poor mean?
- Q. When did people stop having dirt floors?
- Q. How did they clean wood floors in the 1800s?
- Q. Who invented floors?
- Q. Do old homes have subfloors?
- Q. Do houses built in the 50s have hardwood floors?
- Q. Do I need 2 layers of subfloor?
- Q. Should you lay plywood over plank subfloor?
- Q. What is better for subfloor OSB or plywood?
- Q. Can you put plywood over old subfloor?
- Q. How do you install plywood over existing subfloor?
- Q. Can I use Liquid Nails on subfloor?
- Q. What do you put under hardwood flooring?
- Q. What is the best plywood to use for subfloor?
Q. What is the biggest room in a castle?
A great hall is the main room of a royal palace, castle or a large manor house or hall house in the Middle Ages, and continued to be built in the country houses of the 16th and early 17th centuries, although by then the family used the great chamber for eating and relaxing.
Q. What was the most important room in any castle?
The most important room in a castle was the Great Hall. This is where all the members of the household sat down to eat at tables set up for every meal. It was where feasts were held for special days, or when there were guests. King Arthur’s Pentecost Feast takes place in such a Hall.
Q. What is the weakest part of a castle?
The entrance to the castle was always its weakest point. Drawbridges could be pulled up, preventing access across moats. Tall gate towers meant that defenders could shoot down in safety at attacks below. The main gate or door to the castle was usually a thick, iron-studded wooden door, that was hard to break through.
Q. Which was the safest part of a castle?
keep
Q. How many soldiers defend a castle?
For a medieval city/castle as stated by Patrick Owen you would generally need 100s of men during war time, though depending on many factors you could have 15,000 to 50,000 being pretty much the absolute maximum.
Q. Why did Normans build castles?
After their victory at the Battle of Hastings, the Normans settled in England. They constructed castles all over the country in order to control their newly-won territory, and to pacify the Anglo-Saxon population. These timber castles were quite cheap and very quick to build.
Q. Where did soldiers sleep in castles?
In the early Middle Ages, when few castles had large permanent garrisons, not only servants but military and administrative personnel slept in towers or in basements, or in the hall, or in lean-to structures; knights performing castle guard slept near their assigned posts.
Q. How did they keep castles warm?
Castles weren’t always cold and dark places to live. But, in reality, the great hall of castle had a large open hearth to provide heat and light (at least until the late 12th century) and later it had wall fireplace. The hall would also have had tapestries which would have insulated the room against too much cold.
Q. Did old castles have glass windows?
Did medieval castles have glass windows? The stone castles of some of the Medieval Period did have glass windows, but not originally. Windows sometimes had wooden shutters, horn panes, oiled cloth, oiled skins or nothing at all. Arrow slits did not require coverings.
Q. Did castles have wooden floors?
Medieval Times Typically, hardwood flooring was not just about aesthetics, but installed for practicality. Since oak and pine were readily available, those species are the most abundant in homes and castles from the middle ages.
Q. Why did they use rushes on the floor?
During the Middle Ages the floors of most churches and dwellings consisted of compacted earth, and rushes (commonly “sweet flag” Acorus calamus) or other herbs and grasses were strewn over them to provide a sweet smelling, renewable covering for insulation.
Q. How comfortable are castles?
Life in the early castles was far from comfortable. The wind whistled through the wooden shutters in the windows and most people slept on benches or on rough mattresses in the great hall. By 1200s, castles had well furnished bed chambers and living rooms, heated by large open fires and lit by candles.
Q. Why did they put straw on Castle floors?
The herbs were laid on the floor along with reeds, rushes, or straw, so that pleasant odours would be released when people walked on them. In a typical medieval English monastery, for instance, the floor of the dormitory would have been strewn with rushes that were swept and replaced once or twice a year.
Q. Did medieval people have carpet?
The most common motifs used in the carpets of that century were medallion, lamp and cufic script but later carpets began to be decorated further with such patterns as leaves, flowers, pomegranate, octagons and dioamond shapes. …
Q. What does dirt floor poor mean?
Dirt poor. The floor was dirt. Only the wealthy had something other than dirt – hence the saying “dirt poor.” The wealthy had slate floors that would get slippery in the winter when wet, so they spread thresh (straw) on the floor to help keep their footing.
Q. When did people stop having dirt floors?
Earthen floors were predominant in most houses until the mid 14th century in Europe, and persist to this day in many parts of the world.
Q. How did they clean wood floors in the 1800s?
During the 19th century, wood floors were left bare and swept, scrubbed and sanded clean, or they were polished by hand with linseed oil and beeswax. Synthetic resins were used as floor finishes as early as 1900. These synthetic materials included cellulose nitrate, cellulose acetate and by 1910, phenol formaldehyde.
Q. Who invented floors?
About 5,000 years ago, Egyptians developed stone construction. Stone and brick floors began to appear. Soon these floors became works of art as well as a useful surface for the home.
Q. Do old homes have subfloors?
Older homes may have solid hardwood flooring nailed directly on the joists—no subfloor. There is little reason to have more than three layers of flooring (subfloor, underlayment, and floor covering).
Q. Do houses built in the 50s have hardwood floors?
1950’s & 60s- Although other products such as linoleum were starting to get popular, houses in this era still predominantly used hardwood for flooring. 1 1/2″ red and white oak strip flooring was by far the dominant trend. The floors are either strictly red or white oak, or a mix of both species.
Q. Do I need 2 layers of subfloor?
3 Answers. Fasten your first layer plywood subfloor as you normally should. The second (top) layer of plywood joints should not coincide with the joists and the second layer should not be fastened to the joists. Article quote from – Position of Underlayment to Prevent Cracked Tile and Grout By Frank Woeste and Peter A.
Q. Should you lay plywood over plank subfloor?
Install a layer of at least ½” or preferably 5/8” ply over the existing planks. This is particularly important if your old sub floor has lumps and bumps in it. If you don’t respect this thickness of ply, then you’re highly likely to see rises and falls in your new flooring.
Q. What is better for subfloor OSB or plywood?
The National Tile Contractors Association and the Resilient Floor Covering Institute both recommend plywood for subflooring and underlayment, because it doesn’t have the risk of swollen edges that OSB does. Plywood also has a slight advantage in stiffness, which means that subflooring panels need not be quite as thick.
Q. Can you put plywood over old subfloor?
It’s fairly easy to install plywood over subfloor, but you’ll want to give yourself plenty of time to complete the job. Take a sheet of plywood and lay it square in one corner of the work area. You will want to make sure that you leave at least a 1/8″ gap between the walls and the plywood sheets.
Q. How do you install plywood over existing subfloor?
Instructions For Installing Another Layer Of Plywood
- Acclimate the underlayment. Store underlayment in the room it will be installed in for 72 hours before the actual installation.
- Clean the subfloor.
- Start installing the plywood.
- Staple the boards in place.
- Fill the seams.
Q. Can I use Liquid Nails on subfloor?
Liquid Nails LN-602 Subfloor and Deck Construction Adhesive is the perfect adhesive for subfloors, flooring and decking. It can be used inside or outside and all the extreme weather. LN-602 is perfect for bonding building materials such as wafer board, plywood, lumber, etc. and also helps with the squeaking boards.
Q. What do you put under hardwood flooring?
Simply put, underlayment is a layer of material between your subfloor and your floor. While some flooring comes with the underlayment attached, others will require you to install a separate underlayment. Most of the time, underlayment consists of rubber, cork, foam, or felt.
Q. What is the best plywood to use for subfloor?
Standard plywood can be used for subfloors, but a better material is 3/4-inch tongue-and-groove plywood subflooring. The tongue-and-groove edges interlock to resist movement along the panel edges and create an overall stiffer floor.